Harlingen 30 x 75 mm HSS Annular Broach Cutter Universal Weldon Shank Rotabroach Slugger

30 × 75 mm – Broach Cutter – HSS

• Drilling Size: 30 mm
• Drilling Depth: 75 mm
• Overall Length Including Shank: 113 mm
• Overall Length Excluding Shank: 90 mm
• Shank Size: 19 mm universal weldon shank
• Pin Size: O7.98mm x 130 mm
• Please note the pin size is specific to this cutter in both length and diameter,a standard pin size will not work
• Flutes: 6

An annular cutter (A.K.A rota broach or slugger cutter). These particular Annular cutters come fitted with a universal shank therefore can be used in magnetic based drills such as: Alfra , Hougen , Jancy , Euroboor , BDS , Ruko. An annular cutter is far more accurate than a regular HSS twist drill making it ideal for small tolerance parts. Recommended for use in mag base drills Twin Eagle’s range of HSS annular cutters are ideal for any situation where tolerance and fit are a concern and with the added manoeuvrability of a magnetic based drill there is no place that you can’t drill. With the added advantage of multiple flutes you can say goodbye to those chip clearance worries. Twin Eagle’s hardware’s annular cutters are the solution to your high tolerance drilling needs.