Smoke and Carbon Monoxide Alarm LCD CO Detector Smoke Alarm Voice Alert

/>


Note:

1. This product should not be installed in an environment that is extremely cold, extremely hot, has extremely high wind speed, and often has a lot of smoke and dust.

2. The product should be tested once a month.

3. In order to ensure the smoke sensitivity of the product, the surface of the detector needs to be cleaned with a soft brush every six months and the power must be disconnected before cleaning.

4. When smoke and carbon monoxide are sensed at the same time, and both reach the alarm value, the carbon monoxide alarm state takes priority.

5. Due to manual measurement, the size may be slightly different. Thank you for your understanding.

6. Due to different light conditions and different monitors, item color displayed in photos may be showing slightly different from real object.



Specifications:

Color: White

Shell Material: ABS

Installation Method: Wall-mounted ( or Ceiling )

Detection Gas: Carbon Monoxide , Smoke

Carbon Monoxide Sensor Type: Electrochemical

Smoke Sensor Type: Optical Maze

Operating Voltage: 9V Battery ( Battery Not Included )

Power Consumption:

Quiescent Current: ≤15uA

Alarm Current: <45mA

Battery Low Voltage: 7V ± 0.5V

Operating Environment:

Temperature: 0℃~55℃

Relative Humidity: ≤95%

Detection Range: 0-999ppm

Display Error: ± 30 ppm

Smoke Detection area: 20 ㎡

Alarm Volume: ≥80dB

Alarm Value: 30ppm display, more than 100ppm alarm

Manual Testing: YES

Automatic Reset: YES

Sensor Fault Detection: YES

Item Size: 11.6*11.6*4.2cm / 4.57*4.57*1.65in (L*W*H)

Packing Size: 13*13*5.2cm / 5.12*5.12*2.05in (L*W*H)

Net Weight: 187g / 6.6oz

Gross Weight: 230g / 8.1oz



Package List:

1 * CO , Smoke Alarm ( Battery Not Included )

1 * Installation Kit

1 * Instructions ( English )