Automatic Plant Watering System USB Charged for 16 Potted Plants Indoor

 
Automatic drip irrigation net for indoor plants. Just install an indoor plant watering system, set the watering frequency and water supply time, and the automatic watering system will water you well, especially when you are on a business trip, traveling, or busy every day, you don’t have to worry about your potted plants. Once programmed, the automatic watering kit will remember the settings and continue to work without the need to reset each time.
 
Watering system from plants to watering. Drip irrigation sleeves are equipped with programmable timers to ensure precise watering frequency and time, preventing under watering or over watering. Directly deposit water on the roots of plants to reduce evaporation and water loss. Compared with other traditional methods, self irrigation systems can save at least 70% of water. It has great benefits for plants and soil.
 
Easy to assemble and adjust. The plant watering kit includes 1 dev(approximately 2.95 * 2.36 * 3.14 inches in size), 1 hook, 1 water pipe, 3 T-connectors, and 16 pipes with drip heads. It is easy to install within 10 minutes. The buttons and parameters are also easy to understand. The total water volume per minute is about 120ml. Simply calculate the amount of water required by the plant and press the 2 key to complete the setting.
 
USB can be charged. The vegetable self-servwater dispenser is equipped with a 2000mAh lithium battery, which can be used for 2 months after being fully charged in 5 hours. The watering kit can be charged through a USB data cable (with accessories) for easy charging. Powerful power can support up to 16 potted plants at a time.

 
Use indoor plants for watering. The plant watering devis only about 9 * 5 * 3cm and weighs 350 grams (0.77 pounds). It is compact and portable, and can be used indoors, on balconies, or in gardens.
 
Specifications:
Material: Plastic
Battery ty: 2000mA
Lift: 2.5 meters
Water output: 1.2L/min
Power: 4W
Voltage: 3.7V
  
 
include:
1x watering plant
1x filter screen
1×300cm silicone water pipe
1xUSB charging cable
3x three-way adapter
16x dropper
 
Attention: 1. Please fully charge the battery before first use (usually it can be fully charged in about 5 hours), and then use it.
2. The watering machine has siphon phmn. Solving this problem is very simple, just place the water slightly lower than the flowerpot! At the same time, clean backup water should be provided to avoid blockage. Do not bend the inlet and outlet pipes and capillaries to avoid affecting watering work and flow efficiency. The host is only designed to prevent dripping and should not be soaked or placed in water