Automatic Plant Watering System for 16 Potted Plants USB

An automatic drip irrigation net designed specifically for indoor plants. Install this indoor plant watering system, set the watering frequency and water supply time, and it will take excellent care of your plants. This is especially useful when you’re on a business trip, traveling, or have a busy daily schedule, eliminating the worry about your potted plants. Once programmed, the automatic watering kit will remember the settings and continue to operate without the need for resetting each time.

Features:
Precise watering: The drip irrigation sleeves are equipped with programmable timers to ensure accurate watering frequency and time, preventing under – watering or over – watering. It deposits water directly on the roots of plants, reducing evaporation and water loss. Compared with traditional methods, this self – irrigation system can save at least 70% of water, which is beneficial for both plants and soil.
Easy to emble and adjust: The plant watering kit includes 1 device (approximately 2.95 * 2.36 * 3.14 inches in size), 1 hook, 1 water pipe, 3 T – connectors, and 16 pipes with drip heads. It can be easily installed within 10 minutes. The buttons and parameters are straightforward to understand. The total water volume per minute is about 120ml. Simply calculate the water requirement of the plant and press the 2 key to complete the setting.
USB rechargeable: The watering system is equipped with a 2000mAh lithium battery, which can be fully charged in 5 hours and used for 2 months. It can be charged via a USB data cable (with accessories), providing convenient charging. Its powerful power can support up to 16 potted plants at a time.
Compact and portable: The plant watering device is only about 9 * 5 * 3cm and weighs 350 grams (0.77 pounds). It can be used indoors, on balconies, or in gardens.

Specification:
Material: Plastic
Battery capacity: 2000mAh
Lift: 2.5 meters
Water output: 1.2L/min
Power: 4W
Voltage: 3.7V

Package contents:
1x watering plant
1x filter screen
1×300cm silicone water pipe
1xUSB charging cable
3x three – way adapter
16x dropper

Please Notes:
1. Please fully charge the battery before first use (usually it can be fully charged in about 5 hours), and then use it.
2. The watering machine has a siphon phmn. Solving this problem is very simple, just place the water slightly lower than the flowerpot! At the same time, clean backup water should be provided to avoid blockage. Do not bend the inlet and outlet pipes and capillaries to avoid affecting watering work and flow efficiency. The host is only designed to prevent dripping and should not be soaked or placed in water.