RM STATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

Direct replacement to your original unit
Plug - and - play, direct fit, easy installation
Highest grade of lamination materials
Highest grade of copper winding, resistant to 200 degrees Celsius
Connector included

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Please Note:

All electrical components must be fitted by a qualified technician.
Before fitting electrical components ensure the root cause of the original failure has been addressed.
The absence of either of points 1 or 2 above, will void any warranty.
There are multiple stators possible on the 2006 - 2020 Triumph Daytona 675 et Dayton 675 R. Please refer to below:
- This stator replaces only OEM # T1300181 and is used on vehicles with a VIN HIGHER than 564948. For vehicles with VIN up to 381274 or VIN 381275 to 564947, you must look for RM01389.

Dimensions:

Interior diameter: 42mm

Exterior diameter: 115mm

Thickness: 18mm

Length of wires stator to grommet: 240mm

Length of wires grommet to plug: 190mm & 880mm

Length of pickup coil’s wire to grommet: 270mm

Other specifications:

Number of wires: 5

Number of plugs: 2

Number of pins: 5

Number of poles: 18

Wire to wire resistance:

Alternator: Black to Black = 0.6 ohms +-20%

Alternator: to ground = O.L

Pickup: Green to black = 240 ohms +-20%

This product is sold by a third-party seller and they are responsible for their product, the content of their listing and any exchanges of return of their product.

All products sold by third-parties are subject to guarantees that cannot be excluded under the Consumer Guarantees Act.

Direct replacement to your original unit
Plug - and - play, direct fit, easy installation
Highest grade of lamination materials
Highest grade of copper winding, resistant to 200 degrees Celsius
Connector included

Please Note:

All electrical components must be fitted by a qualified technician.
Before fitting electrical components ensure the root cause of the original failure has been addressed.
The absence of either of points 1 or 2 above, will void any warranty.
There are multiple stators possible on the 2006 - 2020 Triumph Daytona 675 et Dayton 675 R. Please refer to below:
- This stator replaces only OEM # T1300181 and is used on vehicles with a VIN HIGHER than 564948. For vehicles with VIN up to 381274 or VIN 381275 to 564947, you must look for RM01389.

This product is sold by a third-party seller and they are responsible for their product, the content of their listing and any exchanges of return of their product.

All products sold by third-parties are subject to guarantees that cannot be excluded under the Consumer Guarantees Act.

RM STATOR TRIUMPH DAYTONA 675 06-18 & TRIUMPH DAYTONA 675 R 14-18 STATOR

Finance Available

Product Details

Specifications

What's Included

Warranty & Returns

You May Also Like

Join millions of shoppers getting what they want for less!

We are here to help!