MLX90640 2.8-inch Thermal Camera, 320x240 -40°C to +300°C(black)

Product Description:This is a handheld multifunctional thermal imaging camera featuring small size and light weight. With 2.8’ TFT display, the data can be seen at a glance. It can be used in a variety of occasions and is an indispensable tool for home and industrial use.Real-time measurement with a range of -40°C to +300°C and a dynamic refresh rate of 8Hz2.8’ screen resolution of 320 * 240; the screen can display and track the maximum temperature, minimum temperature and centre point temperatureHousing is made of FR4 epoxy sheet for better protection of internal components and long service lifeSmall size, easy to carryBuilt-in lithium-ion battery, USB-C charging; up to 4 hours of battery life, can be used while chargingThe camera has a photo function and needs to be held for at least 15S.Built-in SPI Flash chip, can store up to 100 pictures. Connect to computer or mobile phone via data cable to view and copy image filesAll-in-one design, no external devices requiredThermal imaging cameras are used in a wide range of applications including high precision non temperature measurement and body temperature detection, intelligent ambient temperature monitoring and control in buildings, automotive repair and maintenance checks for temperature detection of automotive parts, temperature monitoring and control of microwave ovens and conal ovens, temperature tracking of industrial components, use as a visual temperature sensor, leakage detection and maintenance of underfloor heating equipment, and thermal inspections of circuit boards and components.

Description:This device adopts all-in-one design, no external device is required to workTake photo:Single press the photo/reset button to save the t image under power on state.View or Copy Image:After connecting to computer with USB-C cable, single press the mode key to to USB flash drive mode to read or copy image.Reset:The body can store 99 images, when the storage is full, long press the photo/reset button and release it when the screen blinks, the device will be reset for about 15 seconds to restore the initial state.Note: The device is powered by 3.7v lithium batteries, it is recommended to keep the battery power display at about 50% before prolonged non-use.

Application:High precision non- temperature measurementSecurity and intrusion detectionBody temperature detectionIntelligent building environment temperature measurement and controlAutomotive air conditioning controlMicrowave and oven temperature detection and controlTemperature monitoring of industrial partsVisual temperature sensorsUnderfloor Heating Equipment Side Leakage and MaintenanceThermal detection of circuit boards and components

Specification:Material: epoxy resin board + printed circuit boardInfrared Sensor: MLX90640ESF-BABHardware resolution: 32*24 pixels far infrared arrayScreen resolution: 320*240 pixelsTemperature measurement range: -40℃ to 300℃, theMeasurement accuracy: ±2℃,Operating Temperature: 0 to 50℃, andWorking humidity: ≤70%, Refresh rate: 8HzRefresh rate: 8HzField of view: 55° horizontal x 35° verticalEmissivity: 0.95Charging specification: USB Type-C5V/1ABattery: 3.7V 800mAh lithium-ion batteryOperating time: ≥4 hoursProduct size: 85*55*30mmPackage size: 120*90*32mm Weight: 150gPackaging: carton

Packing list:1 x Thermal imaging camera1 x Mirror Cloth1 x USB Type-C