Passive Infra-Red PIR 360Degree In-Ceiling Detector

An ultra compact PIR motion detection unit suitable for installation directly into the ceiling. 120° beam provides 8 metres of conical detection coverage when mounted on the typical 2.4-3m ceiling. 12V DC input. Mounting hole size: 31mm. Dimensions: 40Ø x 52mm.

• High-Quality Low Noise Quad-Element Pyro-Sensor with 6-14?M Spectral
• Alternate Polarity Single / Dual Pulse Counting Signal Processor
• Security Control Logics Integrated in Proprietary MCU
• On-Board DIP Switch for Feature Settings
• Walk-Test LED Selectable for ON, OFF, or 30-Minute Auto OFF after Power-UP
• On-Board Terminal Block for External Wiring Connections
• (N.C.) / (N.O.) Alarm Output Dry Contact in Series with 10 Ohm Resistor
• Flush-Mount on Ceiling without Screw

• Operation Voltage: 12VDC Nominal, 8-16VDC
• Current Consumption: 15mA Typical at 12VDC
• Power-up Delay: 2 Minutes with LED Indication
• Detection Range: 6/8M at 25°C
• Alarm Output Time: 3 Seconds
• Operation Temperature : -10°C C to 55°C
• Relative Humidity: 95% Non-condensing
• Weight: 30gm net