FRONTIER S004916A 8 Program 12V DC SPDT Alternate Digital Timer Module

This versatile 7 day digital timer module is ideal for use in any appliance which requires automation. It can be configured to switch up to 8 different times during a 24 hour period. In addition, they can be programmed to operate on a wide variety of days. eg. daily, weekdays only, weekends only, every second day, or selected group of days.
Switch - on and switch - off times may be set for each program. ie allows different ‘on’ duration for each program. 8 single duration programs per day ie: 56 programs per week.
The timer has three modes of operation. Includes ‘always on’ and ‘always off’ override modes, which will ignore all programmed events. The mode of operation can only be changed when power is applied to the switch.
In the event of a power failure, the switch retains its program data via an internal CR2032 battery.

For power backup of programmed times a 3V CR2032 lithium battery cell is provided.



KEEP OUT OF REACH OF CHILDREN

THIS PRODUCT CONTAINS A BUTTON BATTERY.
- If swallowed, a lithium button battery can cause severe or fatal injuries within two hours.
- Keep batteries out of reach of children.
- If you suspect your child has swallowed or inserted a button battery, immediately call the 24 - hour poisons information centre on 13 11 26 (within Australia) and seek medical attention.
 

• Contact Rating: 16A @ 30VDC
• Operating Voltage: 12VDC
• Panel Thickness (p in diagram): <7mm
• Switch Type: SPDT

  *Specifications are subject to change without notice.