Launch Creader TPMS 5011 V2 TPMS Diagnostic and Programming Tool Android System

2025 LAUNCH X431 TPMS 5011 V2 – Tire Pressure Programming & Diagnostic Tool

LAUNCH X431 Creader TPMS 5011 V2 is a professional tire pressure monitoring system (TPMS) tool designed for 315/433MHz sensors. It offers full OBD2 functions, 12 reset services, and lifetime free updates. Perfect for workshops and mechanics looking for quick, accurate TPMS activation, programming, and system diagnosis.

■✔️ Supports 99% of TPMS-equipped vehicles worldwide
■✔️ Works with all 315/433 MHz sensors, 100% activation
■✔️ OE Inquiry: Input original sensor part numbers for activation and programming
■✔️ Unlimited sensor programming – replace OE sensors anytime
■✔️ Relearn, match, and program sensors via OBD, Automatic, or Stationary Relearn
■✔️ TPMS system diagnosis: read & clear TPMS DTC codes
■✔️ OBD II / EOBD functions included
■✔️ Lifetime free software updates via Wi-Fi
■✔️ Real-time display: tire pressure, temperature, and battery status
■✔️ Instant report sharing: screenshots, diagnostic reports, and feedback
■✔️ Add-on module compatible with Thread Master

■✔️ Activate 99% of 315MHz/433MHz OEM sensors
■✔️ Read, copy, and write sensor IDs
■✔️ Relearn newly programmed sensor IDs to vehicle ECU for recognition
■✔️ Supports three TPMS relearn methods:
 ■✔️ OBD Relearn – write sensor ID via OBD connector
 ■✔️ Automatic Relearn – drive the vehicle to complete
 ■✔️ Stationary Relearn – manually set in “Learn Mode”

■✔️ Program LAUNCH sensors to replace non-functional or low-battery sensors
■✔️ Supports up to 8 LAUNCH sensors simultaneously
■✔️ Works with LAUNCH LTR-01 / LTR-03 sensors
■✔️ Three sensor programming modes:
 ■✔️ Manual Creation – enter original ID manually
 ■✔️ Automatic Creation – system generates ID
 ■✔️ Copy ID – copy old sensor ID to LAUNCH sensor if still active

■✔️ Read and clear TPMS DTC codes
■✔️ View detailed fault descriptions
■✔️ Monitor the status of all TPMS sensors

■✔️ Oil Reset – recalculates engine oil life after change
■✔️ Brake Reset – resets brake pad position to turn off warning light
■✔️ Battery Matching – recalibrates electrical system for new/replacement battery
■✔️ SAS Reset – calibrates steering angle sensor
■✔️ ABS Bleeding – restores ABS brake sensitivity after air removal
■✔️ Throttle Reset – ensures smooth throttle response
■✔️ D-P-F Regeneration – clears particulate matter from diesel filters
■✔️ TPMS Service – resets sensor ID and tire pressure MIL after replacement
■✔️ Injector Coding – programs correct cylinder injection values
■✔️ Sunroof Reset – recalibrates sunroof control unit
■✔️ Seat Calibration – sets seat positions after adjustment or replacement
■✔️ Windows Calibration – ensures proper operation and alignment

■✔️ Screen: 5-inch, 720×1280
■✔️ Device Size: 211.5 × 99 × 34.5 mm
■✔️ OBD II Input Voltage: 9–18V
■✔️ Battery Capacity: 6000mAh
■✔️ Wi-Fi: 2.4GHz
■✔️ Main Cable Length: 117 cm
■✔️ USB Type-C Interface
■✔️ Storage: 2GB RAM + 32GB ROM
■✔️ Operating Temperature: 0℃–45℃
■✔️ Storage Temperature: –20℃–70℃
■✔️ Upgrade Method: Wi-Fi