ANCEL V3 PRO Bi Directional OBD2 Scanner Car Diagnostic Tool Full System Scan

ANCEL V3 PRO Full System Automotive Diagnostic Scanner Android 10 OBD2 Tool ABS Bleeding EPB DPF TPMS Oil Reset Active Test Bluetooth WiFi Lifetime Free Updates

The ANCEL V3 PRO Full System Automotive Diagnostic Scanner is a professional-grade diagnostic solution engineered to meet the real-world demands of modern vehicle diagnostics and maintenance. Designed for workshops, mobile technicians, and advanced DIY users, it combines factory-level full system diagnostics, active testing, and essential reset services into a fast, reliable Android-based platform. With broad vehicle compatibility from 1996 to 2025, intelligent AutoVIN detection, wireless Bluetooth and WiFi connectivity, and a powerful quad-core processor, the V3 PRO enables accurate fault identification, efficient troubleshooting, and confident repairs across a wide range of automotive systems.

The ANCEL V3 PRO is a professional full-system automotive diagnostic scanner designed for fast, accurate vehicle diagnostics and daily workshop maintenance. Powered by Android 10.0, it delivers enhanced speed, wide vehicle coverage, and essential reset functions in a compact, cost-effective diagnostic solution.

Powerful Android 10 Performance
Running on the Android 10.0 operating system with an A133 ARM Cortex-A53 quad-core processor at 1.5GHz, the V3 PRO offers up to 5x faster response, smoother operation, and improved compatibility with newer vehicle models.

Hardware & Display
Equipped with 2GB RAM, 32GB internal storage, and a clear 720P HD display, the scanner ensures stable performance, quick data processing, and an easy-to-read diagnostic interface for efficient troubleshooting.

Bluetooth & WiFi Connectivity
The V3 PRO supports Bluetooth wireless data transmission and WiFi connectivity for fast software updates, allowing convenient use without cables and ensuring the tool stays up to date.

Full System Diagnostics
This scanner performs factory-level full system diagnostics, reading and clearing both generic and manufacturer-specific fault codes across all vehicle modules. AutoVIN and AutoScan (2006+ vehicles) automatically identify the vehicle and scan all available ECUs with a single tap.

Active Tests & Bi-Directional Control
With full active testing capability, the V3 PRO allows two-way communication to control vehicle components such as injectors, relays, coils, actuators, and other systems, helping identify faults quickly, often within minutes.

10+ Reset & Service Functions
Designed to handle 99% of daily maintenance tasks, the scanner includes essential service functions such as Oil Reset, ABS Bleeding, EPB Reset, TPMS Reset, DPF Regeneration, and other common relearn and reset operations.

Extensive Vehicle Coverage
The built-in database supports over 150 vehicle brands and more than 10,000 models worldwide, covering model years from 1996 to 2025, making it suitable for workshops and technicians working on multiple brands.

Multi-Language Support
The ANCEL V3 PRO offers 13 selectable system languages, including English, French, Spanish, German, Italian, Russian, Portuguese, Japanese, Korean, Polish, Swedish, Czech, and Chinese, easily adjustable from system settings.

Lifetime Software Support
Unlike many OBD2 scanners, the ANCEL V3 PRO includes long-term usability with lifetime access and extended software update support, allowing continued operation even without frequent updates, making it a reliable long-term diagnostic investment.

The ANCEL V3 PRO is a true all-system automotive diagnostic scanner designed to eliminate the need for multiple specialized tools. It provides complete access to all available vehicle control modules, allowing deep diagnostics and accurate fault identification across different systems, depending on the vehicle’s make, model, and year.

Full System Coverage
This scanner communicates with major electronic control units including CEM (Central Electronic Module), ECM (Engine Control Module), TCM (Transmission Control Module), DIM (Driver Information Module), ASDM (Active Safety Domain Master), BBS (Battery Backed-up Sounder), IMS (Interior Movement Sensor), SWM (Steering Wheel Module), HUD (Head-Up Display), SCL (Steering Column Lock Module), TACM (Transmission Actuator Control Module), and more, offering comprehensive insight into vehicle health.

1. Coolant pump
2. Open/close the window
3. Light control
4. Rearview mirror control
5. Windshield adjustment
6. Adjust the wiper
7. Fuel injector tester
8. Starting fuel pump
9. Open and close the clutch
10. Turn the speaker on/off

1. ‌OIL RESET‌

Oil reset (oil change reset, or oil life reset) is crucial for car drivers because regular oil changes are essential to maintain a vehicle’s driving quality, prolong engine life. It’s a breeze to reset the Oil Life Reminder and turn off the oil change light when the engine oil replacement is done.

2. ‌ABS Bleeding‌

Have you ever experienced that your brake pedal was gradually sinking to the floor or becoming loose after repalced a front and rear brake job (with all new calipers, brake cylinder, brake line, or brake fluid)? Check to see if there is air entering when the brake system was opened for item replacement. To obtain a firm brake pedal, the air must be removed. This ABS scan tool will assist in bleeding the brakes, cycling the pump and valves during the bleeding process. (*NOTE: Some vehicles only support manual bleeding.)

3. ‌EPB Reset‌

Struggling to service cars with electric parking brakes? It can be quite a hassle without a scan tool that allows you to retract the electric parking brake calipers. This feature makes it much easier and quicker to reset the brake pad position after replacement.

4. ‌Throttle Adaptation‌

Is your vehicle’s throttle acting up, causing issues like sluggish acceleration, poor response, or an uneven idle? It is time to relearn the throttle’s operating parameters and restore their optimal peformance. This scan tool can make initial settings to throttle actuators, so you’ll have smooth driving after the throttle body has been replaced or cleaned.

5. ‌SAS Calibration‌

After replacing the steering angle position sensor, this LAUNCH scanner for car CRP129E V2.0 can effectively perform SAS calibration, i.e. set the SAS angle to zero and turn off the steering wheel error light on supported models. You can easily set the steering to its default position and align it with the front tyres.

6. ‌BMS Reset‌

Noticed your car system still treating the new battery like the old one? It’s time to assess the battery charge state and register the replacement. Use this code scanner car diagnostic tool to reset on the monitoring unit of the vehicle battery, in which the original low battery fault information will be cleared and the battery matching will be done.

7. ‌DPF Regeneration‌

Ever encountered issues with your D-P-F system, like excessive soot buildup? This diagnostic tool can manage D-P-F regeneration to clear the blockage through continuous bur.ning of the particulates captured in the filter. With LAUNH CRP129E V2.0, you can get rid of stored soot and even find faults in the D-P-F system with no hassle.

8. ‌Injector Coding‌

After the ECU or injector is replaced, LAUNCH CRP129E enables you to write the injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so that the cylinder can better identify injectors to more accurately control or correct cylinder fuel injection quantity.

9. ‌TPMS Reset‌

When replacing tpms sensors, this tpms scan tool can quickly look up the tire sensor IDs from the vehicle’s ECU, reset tire pressure, and turn off the tire pressure MIL. Typically, most tire shops will charge you anywhere between 70 to 150 bucks for a TPMS replacement per single wheel. With this scanner, easily replace it by yourself and save that amount of money.

10. ‌Gearbox Reset‌

By clearing the learning memory of the transmission control unit (TCU), it can be re-adapted to the user’s driving habits and solve problems such as shifting logic confusion, jerking, and dragging caused by long-term congestion or changes in driving style.

The ANCEL V3 PRO supports 13 system languages, including English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, and Swedish, allowing users to operate the scanner comfortably in their preferred language.

Auto VIN Reading automatically identifies the vehicle and performs a comprehensive system scan for quick diagnosis. Online Feedback and Shop Manager features help workshops record vehicle information, fault codes, and customer data for efficient business management. The 4-in-1 Data View displays live data in text, single graph, multiple graphs, or merged graphs for better analysis. Data Record and Playback allow users to save diagnostic history for future reference or technical support. Data Sharing enables reports to be shared, printed, or sent to customers via WiFi.